Compatible Systems MicroRouter 1200i Bedienungsanleitung PDF herunterladen (Seite 10)

GORAMO – Janusz Górecki

MultiLink Router and MikroRouter

www.goramo.com.pl

[email protected]

age 10 from 41

4.3

Introduction the configuration by web page

Note that the settings from a Web page are first placed into the cache device (called RAM) and

only then can be put to use and saved to flash memory. Despite appearances, this division is to

facilitate the configuration of the router and allow extrication with a number of embarrassing

situations.

4.3.1 Buton „Submit”

Placing configuration to the RAM is in practice a form of submitting the contents of Web pages to

the router. It is performed after clicking on "Submit." In this way the configuration is sent to the router

physically, but will be lost when the power cut, or restart the computer. There is not also still active.

4.3.2 The buttons "Changes Apply" and "Submit & Apply"

To activate it, select the button "Apply Changes"„Apply Changes”. Separation of these activities

may be very useful when configure the router remotely. Imagine a situation when you want to eg

change the IP network interface through which we have established a connection to the router. After

this change the connection is broken. Of course, we can connect again, but change the IP address and

gateway, which uses a router, when you try to configure the external network is impossible.

Obviously in cases where the immediate does not prevent us to use the settings we wish to comply

with both settings by selecting the Submit & Apply and it is most likely done option. Submit & Apply

button is available in every form to enter setup, next to the Submit Submit button, because the

operation is a natural continuation of Apply operations on Submit. Apply Changes button is available

on the left side of the Web. Is placed under the main menu web page and is visible only when the Web

configuration changes are implemented in RAM, which have not been put to use..

4.3.3 Save Configuration to Flash, Write To Flash and Write & Apply.

The next step is to save the changes to Flash memory. Record setup takes about two minutes, and

perform it every time you introduce a change would be inconvenient. In addition, the implementation

of this stage late usually allows us to check the setting before their final implementation. Introducing

restrictive firewall settings we are sure that when the lock yourself access to the router, just turn off the

power at the moment to return to the setup, which recently allowed us to get to the router. Flash

memory configurations to be written by pressing the Write To Flash is under the main menu web page.

If you are sure that once introduced the configurations you want to save (or, for example by

introducing it to lose connection to the router, but we are aware of) we can use the Write & Apply

button, which first introduces the configurations introduced into RAM and then writes it right away in

Flash memory.

Write to Flash button is available on the Web at left menu. Is visible only when the RAM is

placed on changes that are not stored in Flash memory. Write & Apply button is available only if the

changes introduced to RAM have not been put into use, or stored in Flash memory.

4.3.4 Forms to enter setup

Entering configuration consists primarily of filling out forms. To facilitate the configuration of all

Web forms are maintained in the same convention. Any form is responsible for a certain area and

under every configuration form is available, there are two buttons: Submit and Submit & Apply. As

already explained, are responsible for sending the configuration from a Web page into RAM, in order

to introduce it to use or save to flash memory in convenient time, or while sending them to the

memory and process usage.

Each consists of a list of fields to configure. In every field we can select an interesting value.

Changing values in a field configuration may hide, or change certain options form (irrelevant options

are hidden.)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 40 41

Kommentare zu diesen Handbüchern

Keine Kommentare

Compatible Systems MicroRouter 1200i Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Compatible Systems MicroRouter 1200i