Compatible Systems MicroRouter 1200i Bedienungsanleitung PDF herunterladen (Seite 9)

GORAMO – Janusz Górecki

MultiLink Router and MikroRouter

www.goramo.com.pl

age 9 from 41

• Software Update GUI

• Load Balancing (bookmark Complex Gateway) between defined Internet gateways

• Connecting to the network interfaces in a bridge connection

• Setting up a wireless network

The graphical interface is not share at the moment all the possibilities of the router.

4.2

Access to the graphical user interface

At the moment on the run router is available RS-232 console, with standard goramo1234 password for

user root, and are configured Ethernet interfaces from eth0 to eth5 depending on the version of the

device.

Eth0 port is assigned an IP address 192.168.0.222. Eth1 port is assigned an IP address 192.168.10.222.

Both ports are prepared to work in the subnets specified mask of 255.255.255.0.

To connect to the web through the port eth0 router must be configured on a PC network, which we

want to operate the device, giving it an IP address pool of 192.168.0.1 to 192.168.0.254, other than the

address 192.168.0.222, and set the subnet mask 255.255.255.0.

4.2.1 The Log over a web page / user name and password

When you connect your computer to the router, open a web browser and type the router's IP

address preceded by the name of the protocol http:// in the address box:

The browser will open the login page of the router. To start the configuration we need to enter the

admin username and standard password goramo1234.

Once you log, in the browser window appears on the software version information recorded on the

router, and a version of the device.

4.2.2 Restoring the default password on a web page

Please note that the console password for the root user is a different password than the password

on the web page. No password can not be read, but being able to log into a web page we are able to

reset the root password, and vice versa: logging into the console and issuing the command:

rm /etc/UI/webpassword

/usr/local/checkconf fix

restore the default password Web pages, user admin. In general, way is to delete the configuration file

with a password Web site and run repairer program for deficiencies in the configuration web page. The

program will restore the default contents of the file.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 40 41

Keine Kommentare

Compatible Systems MicroRouter 1200i Bedienungsanleitung Seite 9