Compatible Systems MicroRouter 1200i Bedienungsanleitung PDF herunterladen (Seite 24)

GORAMO – Janusz Górecki

MultiLink Router and MikroRouter

www.goramo.com.pl

age 24 from 41

To use the complex gateway, set the masquerade between LAN from which you want to use and

complex gateway. In a list of access gateways in the Routing/Masquerade tab will have to choose the

gateway "Gateway Complex”. After its selecting, the traffic sent by all the gateways will be added to

the construction of the Complex Gateway, with appropriate distribution.

Public Address IP field is used to enter the address, which will check the work of the gateways

included in the complex gateway. Router at a time will perform PING public IP address by different

gateways. If one loses the connection to the public IP address will be regarded as inactive.

4.11

Configuring Routing

In the current version of the graphical user interface routing is enabled between each pair of

running network interfaces. On the Routing/Masquerade tab, masquerade can be defined between the

networks indicated a network interface, and the selected gateway. Tab Routing/Static allows you to set

static routes to the specified computers/computer networks.

4.11.1 Routing / Masquerading

Masquerading allows you to share an Internet connection among multiple computers retracted

behind a router - Gateway. In this configuration, the computers on the LAN communicate with the

router, which forwards the query. The external network are shown as incoming queries from the router

(hence the name: The Masquerade). Computers with the external network does not have direct access

to computers on the LAN. Can get only to selected ports and the computers specified in the Port

Forwarding tab.

In the gateways to choose from is also a gateway Complex Gateway. This means that traffic will be

send from the router over several gateways simultaneously (load balancing) from among the

appropriate distribution over the gateways. Gateway Complex Gateway is defined in the Complex

Gateway tab, described in the point 4.10.2.

4.11.2 Routing / Static Routes

Tab Routing /Static allows you to specify so. static routes. Tab allows you to define to which

network interfaces to route packets to be sent to selected IP addresses.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 40 41

Keine Kommentare

Compatible Systems MicroRouter 1200i Bedienungsanleitung Seite 24