Compatible Systems MicroRouter 1200i Bedienungsanleitung PDF herunterladen (Seite 14)

GORAMO – Janusz Górecki

MultiLink Router and MikroRouter

www.goramo.com.pl

age 14 from 41

Option

Clock source

/protocol

Meaning

External

Router synchronizes with the clock received from the link

supplier

Clock source

Internal

Router generates a clock (signal sync) allows data transfer speeds

with any of the range of 64 to 22,000 kbps (maximum rate of

speed is the sum of two channels, ie if first channel will have a

speed 10Mbit/s, the second can only have 12Mbit/s)

Frame Relay

Port HDLC (HSS) is used to work in the Frame Relay network

(the network is characterized by high bandwidth, organized by

Frame Relay protocols and recognized as an open standard).

When you select this option we can choose the settings described

in section 7.2.2.

Cisco

Port HDLC (HSS) is used to work in network organized by

protocols developed by CISCO.

Protocol

Hdlc-eth

HDLC port will be configured to connect two Ethernet network

via the serial port HSS.

After selecting the appropriate Cisco or Frame Relay protocol we can still give its performance. For

Frame Relay protocol, very important is to create a channel DLCI. Example HDLC Configuration

with HDLC Protocol, see the examples under the title Setting POLPAK-T connections.

If you have a router with interfaces G.704 marked E1_0 and E1_1 to the options described above,

there is one more: G.704 route configuration slots. In the Operation Mode field, select G.704 and then

Configure Gaps and select the slot in which transmission is to take place. If you want to use the link in

a transparent mode G.703 in the field Operation Mode HDLC option should be left.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 40 41

Keine Kommentare

Compatible Systems MicroRouter 1200i Bedienungsanleitung Seite 14