Compatible Systems MicroRouter 900i Bedienungsanleitung PDF herunterladen (Seite 18)

18 - CNC Machine Installation - Section 3 Microrouter CNC Machine User's Manual

To connect your PC to the Microrouter:

1) Connect the elements of your PC together as described in your

original PC manufacturers operating manual. At this stage, your

PC should not be switched on.

2) The PC must be physically connected to the Microrouter, using

the supplied RS232 cable. This is the long, thin serial link cable

fitted with a 25 pin D male connector at one end and a 9 pin D

female connector at the opposite end, as shown below right.

3) Connect the 25 pin D male end of the RS 232 cable to the 25 pin

D female port mounted on the righthand side panel of the

Microrouter cabinet (when viewed from the front of the machine),

as shown below left. The port is labelled RS 232.

3: Connecting your PC to the Microrouter

25 pin D male

connector

fitted to

RS232 cable.

25 pin D female

connector fitted to

electrical control box

side panel.

9 Pin D

Female

Connector.

RS232 Cable.

25 Pin D

Male

Connector.

PC Terminology:

The COM ports on your PC may be labelled as Serial ports. Most COM ports

have a 9 pin D MALE connector, though some older computers may be fitted with

additional PCI COM cards having a 25 pin D MALE connection. In this case, a 9

to 25 pin adaptor cable can be added to the RS 232 cable supplied with your

machine. The RS 232 cable supplied with your machine must always be used,

since this cable features crossovers on some of the pin connections.

You must also configure the machine control software to recognise which

numbered COM port is being used by the RS232 machine lead. Details on this

procedure are outlined in your separate CNC machine control software manual.

The Parallel port on your PC may be labelled as the Printer port. The printer port

has a 25 pin FEMALE connector.

Note

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 93 94

Keine Kommentare

Compatible Systems MicroRouter 900i Bedienungsanleitung Seite 18