Compatible Systems MicroRouter 900i Bedienungsanleitung PDF herunterladen (Seite 37)

Section 5 - Preparing Tooling Hardware - 37Microrouter CNC Machine User's Manual

5: Setting Tools in the Laminate Trimmer

Refitting the

Locking Nut.

Multi-use

spanner around

locking nut.

Multi-use spanner

around laminate

trimmer shaft.

Position the first multi-use spanner around the locking nut on the

end of the laminate trimmer shaft (use the conventional spanner

end).

Position the second multi-use spanner around the fixture on the

spindle motor shaft (use the C segment end). Position this spanner

in the opposite direction to prevent the spindle from rotating as the

locking nut is refitted (see below).

continued...

To tighten the locking nut, when directly viewing the end of the

laminate trimmer shaft:

• Turn the multi-use spanner around the locking nut in a clockwise

direction.

• Turn the multi-use spanner around the laminate trimmer shaft in

an anticlockwise direction.

Check that the cutting tool is secure before refitting the laminate

trimmer to the machine head.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 93 94

Keine Kommentare

Compatible Systems MicroRouter 900i Bedienungsanleitung Seite 37