Compatible Systems MicroRouter 900i Bedienungsanleitung PDF herunterladen (Seite 30)

30 - CNC Machine Operation - Section 4 Microrouter CNC Machine User's Manual

The table vacuum pump switch, emergency

stop button, spindle speed and feedrate

override potentiometer controls are mounted

on the front control panel, located on the right

side of the machine cabinet.

4: Part Manufacture -

Overriding the Spindle Speed and Feedrate

Spindle Speed and Feedrate Override Controls.

The spindle speed and feedrate of the Microrouter can be manually

overridden during a machining operation, using the potentiometer

controls fitted on the upper part of the panel illustrated above.

On machines where these controls are not fitted, or disabled, the

spindle speed and feedrate must be overriden using the CNC control

software (please refer to your separate CNC Control Software User’s

Manual for details regarding this feature).

The spindle speed can be overridden between 50% and 120%.

The feedrate can be overridden between 0% and 150%.

To increase the spindle speed or feedrate, rotate the appropriate

control clockwise.

To decrease the spindle speed or feedrate, rotate the appropriate

control anticlockwise.

Spindle Speed and/or

Feedrate override

changes will only be

registered when an

actual spindle speed or

feedrate is being

applied by the CNC

control software.

Note

Spindle speed

override

control.

Feedrate

override

control.

Table

vacuum

pump

switch.

Emergency

stop button.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 93 94

Kommentare zu diesen Handbüchern

Keine Kommentare

Compatible Systems MicroRouter 900i Bedienungsanleitung Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Compatible Systems MicroRouter 900i