Compatible Systems MicroRouter 900i Bedienungsanleitung PDF herunterladen (Seite 59)

Section 7 - Maintenance - 59Microrouter CNC Machine User's Manual

7: Cleaning the Datum Microswitches

Location

Look behind rear A

slideframe assembly.

Y Axis Datum Microswitch.

The microswitch defining the Y axis datum is positioned at the base

of the rear Y axis A slideframe assembly, when viewed from the front

of the machine. The microswitch itself is hidden from view by the A

frame itself. In order to reach the Y axis microswitch, you must

remove the access panel at the rear of the machine (see photo

below).

Using a soft bristled brush, carefully clean dust and debris away

from the microswitch, to an area where it can be removed using a

vacuum cleaner.

If the microswitch is being cleaned with the Y axis at its datum

position, take care not to disturb the position of the trigger bolt attached

to the rear of the machine head assembly.

Y axis

trigger

bolt.

Y axis

microswitch.

Remove access plate at the rear of the

machine, in order to reach the X axis

microswitch and trigger bolt. Use a 4mm allen

(hex) key to remove the eight secxuring bolts.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 93 94

Keine Kommentare

Compatible Systems MicroRouter 900i Bedienungsanleitung Seite 59