Compatible Systems MicroRouter 900i Bedienungsanleitung PDF herunterladen (Seite 77)

Section 10 - Appendix - 77Microrouter CNC Machine User's Manual

10: Denford Directives

[TOOLDEF

This directive sets the length and diameter of a cutting tool. The

length of a tool is the distance from the spindle nose to the bottom of

the cutter.

Example:

G21

[TOOLDEF T1 D8 Z65

This example defines tool number 1 as being 8mm in diameter, and

65mm long.

[STEP

This directive runs an on-screen program in single steps. This

means the program will run one program line, then wait for the

operator to prompt it to move to the next line; this continues until the

program is instructed to stop this function.

The directive applies to both simulation and actual machining with a

program.

[NO STEP

This directive runs an on-screen program without single steps. This

means the program will run as originally intended with no pausing,

unless a pause is requested from within the program itself.

The directive applies to both simulation and actual machining with a

program.

[SHOW

This directive allows the machining operations to be graphically

simulated on-screen.

[NOSHOW

This directive stops the machining operations from being graphically

simulated on-screen.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 93 94

Keine Kommentare

Compatible Systems MicroRouter 900i Bedienungsanleitung Seite 77