Compatible Systems MicroRouter 900i Bedienungsanleitung PDF herunterladen (Seite 36)

36 - Preparing Tooling Hardware - Section 5 Microrouter CNC Machine User's Manual

5: Setting Tools in the Laminate Trimmer

The easiest method of performing a tool change is to remove the

laminate trimmer from the machine head. Transfer the laminate

trimmer to a suitable workbench, where it can be held securely,

since changing the tool is a two handed operation.

Tools required:

• 2 x Multi-use C Spanner (supplied).

Your microrouter must

only be used with

standard 1/4” or 1/8”

shank routing bits,

capable of running

safely at speeds of

26,500RPM.

Safety First !

Removing a Tool.

Position the first multi-use spanner around the locking nut on the

end of the laminate trimmer shaft (use the conventional spanner

end).

Position the second multi-use spanner around the fixture on the

spindle motor shaft (use the C segment end). Position this spanner

in the opposite direction to prevent the spindle from rotating as the

locking nut is released (see below).

Multi-use

spanner around

locking nut.

Multi-use spanner

around laminate

trimmer shaft.

Removing the

Locking Nut.

Refitting a Tool.

Place the appropriate collet into the end of the laminate trimmer

shaft (a). The collet is the tapered, tubular, split metal casing. Hand

thread the locking nut back onto the laminate trimmer shaft (b), then

place the new cutting tool into this assembly (c). Refer to the

diagrams on the next page...

To loosen the locking nut, when directly viewing the end of the

laminate trimmer shaft:

• Turn the multi-use spanner around the locking nut in an

anticlockwise direction.

• Turn the multi-use spanner around the laminate trimmer shaft in

a clockwise direction.

Caution.

If the cutting tool has

been recently used, it

may still be HOT.

Safety First !

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 93 94

Kommentare zu diesen Handbüchern

Keine Kommentare

Compatible Systems MicroRouter 900i Bedienungsanleitung Seite 36

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Compatible Systems MicroRouter 900i